Stage 1 Remap on RX8 with Grams 1000cc Injectors
Posted: March 23rd, 2022, 8:34 am
Hi Guys
I have an RX8 which has had a Gold Rebuild Engine
I have bought 4 Grams 1000cc Injectors and would like to get them installed into my engine
The scaling 1 is set to : 369.472 and scaling 2 is set to : 475.93
I am assuming that scaling 1 is the Yellow Stock Injectors (4) and scaling 2 is the Red Stock Injectors (2)
I have new Red Stock Injectors to go in and would also like to install the GRAMS 1000cc injectors as the secondary (to replace the yellow)
I have got the latency settings direct from Grams for the injectors (see image attached) and I would like to alter the latency setting within the Versatune Stage 1 Stock remap table (see attached image)
Can someone help with this please as I want to put the new injectors into the RX8 but am not clear about which setting in the table I need to alter. I also would like to know what the new "Scaling 1" value needs to be changed to from it's current value of 369.472
Thanks in advance
David C
I have an RX8 which has had a Gold Rebuild Engine
I have bought 4 Grams 1000cc Injectors and would like to get them installed into my engine
The scaling 1 is set to : 369.472 and scaling 2 is set to : 475.93
I am assuming that scaling 1 is the Yellow Stock Injectors (4) and scaling 2 is the Red Stock Injectors (2)
I have new Red Stock Injectors to go in and would also like to install the GRAMS 1000cc injectors as the secondary (to replace the yellow)
I have got the latency settings direct from Grams for the injectors (see image attached) and I would like to alter the latency setting within the Versatune Stage 1 Stock remap table (see attached image)
Can someone help with this please as I want to put the new injectors into the RX8 but am not clear about which setting in the table I need to alter. I also would like to know what the new "Scaling 1" value needs to be changed to from it's current value of 369.472
Thanks in advance
David C