NC1 Disable Immobilizer issues

Tuning discussion specific to 2006-2008 NC1 Miata MX-5 vehicles
Post Reply
abitor123
Posts: 2
Joined: December 1st, 2019, 4:18 pm

NC1 Disable Immobilizer issues

Post by abitor123 »

I deactivated my imobolizer but it still active. Is there an extra step to disable it?
wooglins
Posts: 1
Joined: July 19th, 2019, 2:52 am

Re: NC1 Disable Immobilizer issues

Post by wooglins »

I am curious about this as well. It is an important option that I need to activate on my 2006 NC1. Watching.
mituc
VersaTuner guru
Posts: 1323
Joined: December 17th, 2011, 2:47 pm
Location: Iasi/Romania

Re: NC1 Disable Immobilizer issues

Post by mituc »

The immobilizer is a different system. It will decide if it will power the ECU or not. Versatuner can only change the actual ECU calibration, not other subsystems.
However, what you guys want can be done with the Mazda shop tools, IDS or however is called. Forscan may be helpful as well.
2008 Cosmic Blue Mazda 3MPS
Built engine + WMI + GTX3071 gen2, ~509BHP @34PSI
2008 Icy Blue Mazda CX7
Stock engine and exhaust (YES!!), JBR3" + GTX2867 gen2 + Autotech HPFP, self-tuned to 330-ish BHP
Post Reply