Anyone work through rescaling MAF calibration tables to correct a p0101? I installed the Bosch 68mm throttle body and am using the crackle pop tune. Car doesn't seem to really care about the code.
I have reflashed the tune disabling the DTC for this code to collect data and started to attempt a rescale on the MAF sensor calibration tables but can't seem to get it to a point where the code stays off.
P0101 after larger throttle body install
-
CrazyCanadian
- Posts: 46
- Joined: July 4th, 2021, 8:32 pm
Re: P0101 after larger throttle body install
Posting your tune and some logs would be helpful
-
liltoaster91
- Posts: 2
- Joined: May 30th, 2026, 1:29 pm
Re: P0101 after larger throttle body install
Here is a driving log and the tune file that is on the car. Sorry for such a late response and thanks for taking a look.
- Attachments
-
Data log - 2026-05-30 15.44.35_2.csv- (662.26 KiB) Downloaded 1 time
-
- Data log - 2026-05-30 15.44.35_3.csv
- (650.71 KiB) Downloaded 1 time
-
- Data log - 2026-05-30 15.44.35.csv
- (872.19 KiB) Downloaded 1 time
-
- MX-5 NC2 NC3 Stage I for Stock Car 93US 98EU Octane with Aggressive Crackle and Pop v1.07.vtune
- (23.62 KiB) Downloaded 1 time