Hi there,
Is there a way to modify MAF breaking points just like Cobb AP can do?
Are BP in VersaTuner: 0~5.7, 5.71~18, 18.01~30, 30.01~70 & 70~up?
Cheers.
MAF breaking points
MAF breaking points
Mazda 6 MPS, BPV GFB, RX-8 wheels, B8 + Eibach Pro-Kit, CS 3" SRI, GS EBCS (interrupt), CS 3" TMIC, EGR off, HPFP internals, CS catted downpipe, 3 bar MAP, BNRS3, forged engine and stuff
Re: MAF breaking points
Modify LTFT Partition 1-6 Maps
400+ Mazda6 MPS
ATP GTX3071, AEM SRI, CPe TIP, Treadstone TR11 FMIC, 3" Rud Exhaust, KMD HPFP, Methanol Injection Kit, CP Forged Pistons, K1 Forged Rods
Tuned with
ATP GTX3071, AEM SRI, CPe TIP, Treadstone TR11 FMIC, 3" Rud Exhaust, KMD HPFP, Methanol Injection Kit, CP Forged Pistons, K1 Forged Rods
Tuned with
Re: MAF breaking points
Nice, thanks!YuraL wrote:Modify LTFT Partition 1-6 Maps
Mazda 6 MPS, BPV GFB, RX-8 wheels, B8 + Eibach Pro-Kit, CS 3" SRI, GS EBCS (interrupt), CS 3" TMIC, EGR off, HPFP internals, CS catted downpipe, 3 bar MAP, BNRS3, forged engine and stuff
Re: MAF breaking points
So by default 5.7 (A), 18 (B), 30 (C), 200 (D), 200 (E) and 200 (F).
Let's change it to 5.7 (A), 18 (B), 30 (C), 70 (D), 120 (E) and 150 (F). I'm getting 200 g/s readings in CL, it will help.
Cheers and thanks again.
Let's change it to 5.7 (A), 18 (B), 30 (C), 70 (D), 120 (E) and 150 (F). I'm getting 200 g/s readings in CL, it will help.
Cheers and thanks again.
Mazda 6 MPS, BPV GFB, RX-8 wheels, B8 + Eibach Pro-Kit, CS 3" SRI, GS EBCS (interrupt), CS 3" TMIC, EGR off, HPFP internals, CS catted downpipe, 3 bar MAP, BNRS3, forged engine and stuff