Page 1 of 1
Parameter "Actual equivalence/air to fuel ratio" no support
Posted: January 22nd, 2017, 8:32 pm
by kiwiginger
Hey guys. I'm a bit new to the forum. Have a Gen1 Mazdaspeed Axela over here in NZ and just installed Versatuner.
I'm currently having an issue regarding recording logs.
I've attached a screenshot of the error message.
Anyone else had the same issue regarding this?
Thanks in advance
Re: Parameter "Actual equivalence/air to fuel ratio" no supp
Posted: January 23rd, 2017, 10:17 am
by mituc
You will have to send an email to the versatuner crew and ask them to take a look and eventually send you a new build of your app, probably these PIDs were not linked to your CPU series or something like this.
Re: Parameter "Actual equivalence/air to fuel ratio" no supp
Posted: January 23rd, 2017, 10:19 am
by Ugnius @ VersaTune
We are looking into the issue. This is the first user with a JDM ECU for this platform, so things seem to be a little different there.
Re: Parameter "Actual equivalence/air to fuel ratio" no supp
Posted: January 26th, 2017, 3:54 pm
by Ugnius @ VersaTune
Problem has been fixed. AFR parameters can now be logged on all ECUs, including JDM.
Re: Parameter "Actual equivalence/air to fuel ratio" no supp
Posted: January 27th, 2017, 1:29 am
by mituc
You guys are great... You're considering expanding to the Ford EcoBoost world as well, right? Because if you do I will not have a hard time any more to chose between the typeR and the focus RS... the Versatuner release on that platform will make up for the non-existent trunk on the RS
Re: Parameter "Actual equivalence/air to fuel ratio" no supp
Posted: January 27th, 2017, 8:59 pm
by kiwiginger
Really quick reply's to my emails too, keep it up!!!
Agree with the above. The Focus RS would be an awesome platform (if I could afford one) to work on.