Issues on a friends car.

VersaTuner for Mazdaspeed6, Mazda 6 MPS, Mazdaspeed3, Mazda 3 MPS, CX7
Post Reply
kiwiginger
Posts: 9
Joined: January 22nd, 2017, 8:24 pm

Issues on a friends car.

Post by kiwiginger »

SO a friend of mine uses an Accessport (plz no hate :D ) and hes trying to get his GEN1 tuned HOWEVER
He's having issues with the trying to get is LTFT but because his AFR is not getting target, its not ideal.
He's so far replaced his o2 sensors and we SUSPECT that the MAF sensor is ok although the idle voltages are reading between 1.2v-1.3 (we will trial another MAF sensor to confirm).

Hes installed the HPFP and has the CObb stage 2 mods and a FMIC (3" Intake and DP)
Has anyone had issues with the relief valve not opening properly once the HPFP upgrade has been installed?
mituc
VersaTuner guru
Posts: 1324
Joined: December 17th, 2011, 2:47 pm
Location: Iasi/Romania

Re: Issues on a friends car.

Post by mituc »

As usually, VT or not, we'd like to see a log rather than building our opinion on your partially built opinion :)
Also, a list of the aftermarket parts he has on the car would help quite a bit.
2008 Cosmic Blue Mazda 3MPS
Built engine + WMI + GTX3071 gen2, ~509BHP @34PSI
2008 Icy Blue Mazda CX7
Stock engine and exhaust (YES!!), JBR3" + GTX2867 gen2 + Autotech HPFP, self-tuned to 330-ish BHP
Post Reply