I have a perrin one ...
Gonna have to figure out how to install it, but I don't think it should be much of an issue.
One problem solved, another created...
Re: One problem solved, another created...
+1 the Grimmspeed is pnp, and for the ms6 at least, it is also bolt on with no drilling or fabing required.
- Steve @ VersaTune
- Lead tuner
- Posts: 1157
- Joined: March 29th, 2010, 12:58 pm
Re: One problem solved, another created...
I installed a new HPFP. Now I have good fuel pressure. Unfortunately, in order to get over 2.4 load with the stock K04, I need to go over 22 psi. I can't read much over 22 psi with the stock MAP sensor. I don't really want to run without overboost protection, and the K04 is pretty much out of breath anyway.
The high load testing will have to be done on Fez's car until I can get a GT35 of my own.
The high load testing will have to be done on Fez's car until I can get a GT35 of my own.
Re: One problem solved, another created...
Roger that!!! hehehee