Here is a handy adapter so that you don't have to cut the harness to install a 3.0 or 3.5 BAR TMAP.
www.bitwise-motorsports.com/
Bosch MAP sensor Plug-n-Play adapter
-
Steve @ VersaTune
- Lead tuner
- Posts: 1157
- Joined: March 29th, 2010, 12:58 pm
Re: Bosch MAP sensor Plug-n-Play adapter
I can confirm it works perfectly and it's a very good quality connector.
2008 Cosmic Blue Mazda 3MPS
Built engine + WMI + GTX3071 gen2, ~509BHP @34PSI
2008 Icy Blue Mazda CX7
Stock engine and exhaust (YES!!), JBR3" + GTX2867 gen2 + Autotech HPFP, self-tuned to 330-ish BHP
Built engine + WMI + GTX3071 gen2, ~509BHP @34PSI
2008 Icy Blue Mazda CX7
Stock engine and exhaust (YES!!), JBR3" + GTX2867 gen2 + Autotech HPFP, self-tuned to 330-ish BHP
Re: Bosch MAP sensor Plug-n-Play adapter
$75? IMHO overpriced.
I bought original Bosch connector for $5
I bought original Bosch connector for $5
400+ Mazda6 MPS
ATP GTX3071, AEM SRI, CPe TIP, Treadstone TR11 FMIC, 3" Rud Exhaust, KMD HPFP, Methanol Injection Kit, CP Forged Pistons, K1 Forged Rods
Tuned with
ATP GTX3071, AEM SRI, CPe TIP, Treadstone TR11 FMIC, 3" Rud Exhaust, KMD HPFP, Methanol Injection Kit, CP Forged Pistons, K1 Forged Rods
Tuned with
Re: Bosch MAP sensor Plug-n-Play adapter
What's the Bosch part number for that? The local Bosch stores told me to buy a new volkswagen and get the connector I need from that and ditch the car afterwards
As for $75 including shipping... it's actually like $55-60 for the connector, considering that at ballenger motorsports you can get only the pigtail for like $25 I thought it's fair. And I still think.
As for $75 including shipping... it's actually like $55-60 for the connector, considering that at ballenger motorsports you can get only the pigtail for like $25 I thought it's fair. And I still think.
2008 Cosmic Blue Mazda 3MPS
Built engine + WMI + GTX3071 gen2, ~509BHP @34PSI
2008 Icy Blue Mazda CX7
Stock engine and exhaust (YES!!), JBR3" + GTX2867 gen2 + Autotech HPFP, self-tuned to 330-ish BHP
Built engine + WMI + GTX3071 gen2, ~509BHP @34PSI
2008 Icy Blue Mazda CX7
Stock engine and exhaust (YES!!), JBR3" + GTX2867 gen2 + Autotech HPFP, self-tuned to 330-ish BHP
-
Steve @ VersaTune
- Lead tuner
- Posts: 1157
- Joined: March 29th, 2010, 12:58 pm
Re: Bosch MAP sensor Plug-n-Play adapter
It's a plug and play adapter. It plugs in to your stock TMAP connector on your harness and plugs in to the Bosch TMAP. No cutting or splicing. 100% reversible.