Bosch MAP sensor Plug-n-Play adapter
Posted: July 26th, 2012, 11:03 am
Here is a handy adapter so that you don't have to cut the harness to install a 3.0 or 3.5 BAR TMAP.
www.bitwise-motorsports.com/
www.bitwise-motorsports.com/
VersaTune User Forum
Forum for users of VersaTuner tuning software for Mazda ECUs
https://www.versatune.net/forum/
Bosch MAP sensor Plug-n-Play adapter
Page 1 of 1
Re: Bosch MAP sensor Plug-n-Play adapter
Posted: July 26th, 2012, 1:33 pm
I can confirm it works perfectly and it's a very good quality connector.
Re: Bosch MAP sensor Plug-n-Play adapter
Posted: July 26th, 2012, 4:37 pm
$75? IMHO overpriced.
I bought original Bosch connector for $5
I bought original Bosch connector for $5
Re: Bosch MAP sensor Plug-n-Play adapter
Posted: July 27th, 2012, 3:55 am
What's the Bosch part number for that? The local Bosch stores told me to buy a new volkswagen and get the connector I need from that and ditch the car afterwards
As for $75 including shipping... it's actually like $55-60 for the connector, considering that at ballenger motorsports you can get only the pigtail for like $25 I thought it's fair. And I still think.
As for $75 including shipping... it's actually like $55-60 for the connector, considering that at ballenger motorsports you can get only the pigtail for like $25 I thought it's fair. And I still think.
Re: Bosch MAP sensor Plug-n-Play adapter
Posted: July 29th, 2012, 10:34 pm
It's a plug and play adapter. It plugs in to your stock TMAP connector on your harness and plugs in to the Bosch TMAP. No cutting or splicing. 100% reversible.