Tune editor prebuilt map

[GhostMZD3]

Hello I wondered if when I buy the highest license (I currently have the personal license) I can modify the maps that are already in Versatuner to generate Pops only by releasing the accelerator, but I read in another post that Pops cannot be generated in SkyActiv engines by that way because it does not inject gas when releasing the accelerator pedal, then it would not help me (for now) to buy the highest license. Thanks

[Ugnius @ VersaTune]

No, you won't be able to do that. We have not found a way to prevent fuel cut when accelerator is released. If there was an easy way, we would change our prebuilt crackle and pop tunes to work like that.

[GhostMZD3]

No, you won't be able to do that. We have not found a way to prevent fuel cut when accelerator is released. If there was an easy way, we would change our prebuilt crackle and pop tunes to work like that.

Another question, can i activate with the full license things like outside temperature warning, 120km/h warning, and stuff like that?

[mituc]

No, those warnings are implemented by some other modules, usually the comfort module. Versatuner only alters the engine control unit calibrations.

[GhostMZD3]

No, those warnings are implemented by some other modules, usually the comfort module. Versatuner only alters the engine control unit calibrations.

Thanks for the response, do you know of any software to do this, paid or free?

[mituc]

I think on the Skyactiv cars, depending on the generation, you may still be able to do a few things with ForScan. If you can't do that with forscan and it's still something that can be done then it's the Mazda factory software that the dealers have.

[GhostMZD3]

I think on the Skyactiv cars, depending on the generation, you may still be able to do a few things with ForScan. If you can't do that with forscan and it's still something that can be done then it's the Mazda factory software that the dealers have.

thanks, I tried with ForScan but when connecting through the OBD it says that I have a custom tune and I need to enter the factory PCM number, but I don't know how to obtain the factory number of the PCM, I will need to uninstall Versatuner, take the factory number (if is that so, from what parameter can I take it?) and then reinstall Versatuner? my car is a Mazda 3 BP 2020

[mituc]

You can try to return the car to stock from versatuner and then reconnect with forscan. I do not have a car like yours so I can't guide you through the process, you may need to reach out to the Forscan dedicated forums to get the right answer.