Adjustment of mega spool
Posted: April 12th, 2017, 12:28 pm
I just tried to enable launch control on my car. First I did not activate the mega spool. But did it afterwards.
When testing the car the clutch slipped. When preparing for launch the boost was 14 psi. The clutch is a standard clutch, and was replaced 5000 km ago.
Should I advance the ignition to lower the boost, and protect the clutch, or?
Elvang
When testing the car the clutch slipped. When preparing for launch the boost was 14 psi. The clutch is a standard clutch, and was replaced 5000 km ago.
Should I advance the ignition to lower the boost, and protect the clutch, or?
Elvang