Yesterday Flash for a new MAP (second flash in historic but first time in the day).
at 89% the status bar stop to progress and na error window pop up. Problem with ID and the ECU will be lock.
I did a recovery flash and after I did the reflash again.
I want to know wich factor can do that, what I can do to be sure this situation don't happen again.
I'm be stressed to reflash another time
(sorry if somes english mistake french is my first language)
Lost communication between Versatuner and ECU - ECU lock
-
- Posts: 5
- Joined: April 1st, 2013, 11:26 am
Lost communication between Versatuner and ECU - ECU lock
CX-7 AWD 2.3T 2012 // CP-e HPF Pump //CP-e CAI // Samco TIH // Corksport TMIC // Custom 3'' Midpipe // Turbosmart dual port BOV //H&R coil drop // Sure RMM
- Steve @ VersaTune
- Lead tuner
- Posts: 1157
- Joined: March 29th, 2010, 12:58 pm
Re: Lost communication between Versatuner and ECU - ECU lock
If you are using a Tactrix OpenPort, make sure that the USB cable is tight in the Tactrix.
Make sure that your laptop has plenty of battery and that it is not going into standby/sleep mode,
Make sure that the cable is tightly connected to the OBD-II port of the car.
Make sure that your laptop has plenty of battery and that it is not going into standby/sleep mode,
Make sure that the cable is tightly connected to the OBD-II port of the car.