cannot identify car

Installation and Usage Support
Post Reply
Ianstattoos
Posts: 18
Joined: July 19th, 2020, 2:11 am

cannot identify car

Post by Ianstattoos »

hi, so I flashed an ots tune this morning everything was fine. I went for a long drive and when I went to plug it back in to take some data logs it will no longer identify my car. any help would be great thanks.
User avatar
Ugnius @ VersaTune
Lead developer
Posts: 580
Joined: March 19th, 2010, 11:57 am

Re: cannot identify car

Post by Ugnius @ VersaTune »

Does it show any errors? Is the ignition turned on?
Ianstattoos
Posts: 18
Joined: July 19th, 2020, 2:11 am

Re: cannot identify car

Post by Ianstattoos »

yes ignition is on, its saying cannot read data from car and to make sure obd is connected. ive tried reinstalling drivers for the obd with no luck. ive also reinstalled VT again with no luck.
User avatar
Ugnius @ VersaTune
Lead developer
Posts: 580
Joined: March 19th, 2010, 11:57 am

Re: cannot identify car

Post by Ugnius @ VersaTune »

Well that could be either a driver issue with the cable or a physical issue with your OBD-II port. Try using a different computer and spray some contact cleaner on the OBD-II port.
Ianstattoos
Posts: 18
Joined: July 19th, 2020, 2:11 am

Re: cannot identify car

Post by Ianstattoos »

Tried again this morning, plugged it in and out a number of times and it worked. It might just be my crappy laptop having a wobble. Thanks for your replies, appreciate it.
Post Reply