Page 1 of 1
cannot identify car
Posted: July 23rd, 2020, 7:22 am
by Ianstattoos
hi, so I flashed an ots tune this morning everything was fine. I went for a long drive and when I went to plug it back in to take some data logs it will no longer identify my car. any help would be great thanks.
Re: cannot identify car
Posted: July 23rd, 2020, 8:05 am
by Ugnius @ VersaTune
Does it show any errors? Is the ignition turned on?
Re: cannot identify car
Posted: July 23rd, 2020, 9:52 am
by Ianstattoos
yes ignition is on, its saying cannot read data from car and to make sure obd is connected. ive tried reinstalling drivers for the obd with no luck. ive also reinstalled VT again with no luck.
Re: cannot identify car
Posted: July 23rd, 2020, 8:22 pm
by Ugnius @ VersaTune
Well that could be either a driver issue with the cable or a physical issue with your OBD-II port. Try using a different computer and spray some contact cleaner on the OBD-II port.
Re: cannot identify car
Posted: July 23rd, 2020, 8:56 pm
by Ianstattoos
Tried again this morning, plugged it in and out a number of times and it worked. It might just be my crappy laptop having a wobble. Thanks for your replies, appreciate it.