All the below versions seem to be earlier than the recall date, just unsure if the first 2 contain the post recall calibration with them stating updated revisions in the release notes. If you could please send me a link to download 1.13.39.0 & 1.13.6.0 I'll install both and monitor the egr values in forscan with the the base tune installed.
Version 1.13.39.0
3/29/2019
NEW FEATURES
- VersaTuner Lite and VersaTuner Free editions
- OBDLink SX support (beta)
- Improved stability when using OBDLink LX/MX Bluetooth
- Updated these SkyActiv-D ECU calibrations to the latest official version: SH6S, SHBM, SHAH
FIXES
- Corrected coil dwell scaling and limits on Series I and II Mazda RX-8
Version 1.13.29.0
1/17/2019
NEW FEATURES
- Added "Catalyst temperature" parameter to Gen 1 and Gen 2 Mazda RX-8 platforms
- Added support for different new ECU calibrations
- Updated these SkyActiv-D ECU calibrations to the latest official version: SH3E, SH7R, SH12, SH5L, SH4K
FIXES
- Table values of variably sized tables were incorrectly interpolated when flashing a tune straight from the online tune DB on Gen 1 Mazda RX-8 platform
- VersaTuner application icons were not shown on some versions of Windows 10
Version 1.13.6.0
7/10/2018
NEW FEATURES
- Possibility to edit the axis values (where technically possible) to accommodate turbocharged/supercharged, high load or high RPM applications
- Automatically rescale table values after editing the axis for easy tuning
- Automatic updates - never miss a VersaTuner update in the future
- New license activation procedure
- Possibility to work with multiple cars and tuning platforms using one license
- User portal on
www.versatuner.com - manage your VersaTuner licenses, download latest setup packages and update your contact details
- Added support for flashing with OBDLink LX/MX bluetooth interfaces (be careful when flashing over a wireless interface)
- Optimized ELM327 and OBDLink LX/MX interface performance
- Possibility to display "My Tunes" in a grid with sorting and filtering capabilities
- It is possible to quickly find a DTC that you want to disable in tune customizer
- Launch control and no lift shift rev limits can now be set up to 10000 RPM
- VersaTuner setup packages and libraries are now digitally signed for higher security
- Online tune database is loaded faster and works with all firewalls
Gen 1 AND Gen 2 MAZDA RX-8
- Flash counter is not incremented when flashing with VersaTuner, you can reflash your ECU many hundreds of times without locking it
- Added new, renamed existing fuel tables and updated their descriptions
Gen 1 MZR DISI
- Added the possibility to disable the DTCs P2096, P2097, as well as some others
FIXES
- Corrected Equivalence Ratio parameter to use ISO parameter and scaling for all DISI and RX-8 platforms
- Fixed the issue when some Gen 2 Mazda 3 MPS vehicles would require multiple attempts to complete a reflash
- Fixed the problem when trying to read DTCs from advanced keyless entry module on gen 1 Mazda RX-8
- Fixed the scaling for Charge Air Cooler Temperature B1S2 parameter on SkyActiv-D platforms
- Fixed an issue when trying to copy and paste values between tables of different size in the Tune Editor