Car identification & connection issues

Installation and Usage Support
Post Reply
LollerBaller
Posts: 2
Joined: January 7th, 2023, 4:30 pm

Car identification & connection issues

Post by LollerBaller »

I installed Versatuner today and tried to connect it to my gen 2 MS3, when the USB to OBD-II cable is plugged in and the "Choose Vehicle Interface" comes up, there are no options available. The OBD-II adapter that I am using is a "vLinker FS" and operates through FORScan, is there any software that I need to install of active for it to connect with VersaTuner?
User avatar
Ugnius @ VersaTune
Lead developer
Posts: 580
Joined: March 19th, 2010, 11:57 am

Re: Car identification & connection issues

Post by Ugnius @ VersaTune »

VersaTuner only supports ELM327 based vehicle interfaces over Bluetooth. ELM327 devices have limited functionality and cannot be used to reflash a car, they only provide low speed data logging. We recommend that you get OBDLink SX or Tactrix OpenPort 2.0 which can be used to access all features of VersaTuner.
LollerBaller
Posts: 2
Joined: January 7th, 2023, 4:30 pm

Re: Car identification & connection issues

Post by LollerBaller »

Thanks for offering your help! I was able to return my old OBDII connection cable and replaced it for the one recommended by Versatuner. The program is working fine now.
Thanks once again :)
Post Reply