Real time logging

Installation and Usage Support
Post Reply
tophe88
Posts: 29
Joined: May 6th, 2022, 8:31 am

Real time logging

Post by tophe88 »

Hello

When will be avalaible, the realtime logging and see values on AFR map ?


Regards
mituc
VersaTuner guru
Posts: 1324
Joined: December 17th, 2011, 2:47 pm
Location: Iasi/Romania

Re: Real time logging

Post by mituc »

No, the real time logging will show you only what the ECU commands and reads (desired and actual AFRs), as well as other values, including the desired values if they are available (desired fuel rail pressure and the actual, desired throttle position and the actual, and so on). But the Software will not draw a pointer on an AFR table and show you that, actually it's pretty difficult because you may be looking at the closed loop AFR table and all of a sudden the ECU enters open loop, or applies correction values from another table, and so on.
2008 Cosmic Blue Mazda 3MPS
Built engine + WMI + GTX3071 gen2, ~509BHP @34PSI
2008 Icy Blue Mazda CX7
Stock engine and exhaust (YES!!), JBR3" + GTX2867 gen2 + Autotech HPFP, self-tuned to 330-ish BHP
Post Reply