VersaTune User Forum

Hello

When will be avalaible, the realtime logging and see values on AFR map ?


Regards

No, the real time logging will show you only what the ECU commands and reads (desired and actual AFRs), as well as other values, including the desired values if they are available (desired fuel rail pressure and the actual, desired throttle position and the actual, and so on). But the Software will not draw a pointer on an AFR table and show you that, actually it's pretty difficult because you may be looking at the closed loop AFR table and all of a sudden the ECU enters open loop, or applies correction values from another table, and so on.