Flash or recovery impossible...
Flash or recovery impossible...
I just bought versa full and already an error
It's an MS3 2008 Europe.
I can't flash or simply recover my ecu to original state. I have an error. How can we proceed ? My new race car is already tuned with versa but not by me and i don't know the tuner. I have obdlink sx, tactrix, AVDI official full for j2534 and multiple other official tools for passthru and remap.
Can you do something about that ? I haven't time for remap with winols and this horrible official ktag.
Thx and have a good day !
- Ugnius @ VersaTune
- Lead developer
- Posts: 590
- Joined: March 19th, 2010, 11:57 am
Re: Flash or recovery impossible...
This error can mean one of two things:
1. The ECU is stuck in some weird state after the last reflash. Try disconnecting the battery for a few minutes to reset it and then try again.
2. The ECU was tuned previously with a tuning solution that locks it on a deep level. It has not been tuned with VersaTuner. You will need to remove the tune before you can install VersaTuner or replace the ECU.
1. The ECU is stuck in some weird state after the last reflash. Try disconnecting the battery for a few minutes to reset it and then try again.
2. The ECU was tuned previously with a tuning solution that locks it on a deep level. It has not been tuned with VersaTuner. You will need to remove the tune before you can install VersaTuner or replace the ECU.