OBDLink SX is now supported!

Discussion of various J2534 Pass-Thru devices and Portable Computers.
Post Reply
User avatar
Steve @ VersaTune
Lead tuner
Posts: 1142
Joined: March 29th, 2010, 12:58 pm

OBDLink SX is now supported!

Post by Steve @ VersaTune »

We are excited to announce that OBDLink SX cables are now supported by all versions of VersaTuner.
Logging and flashing are somewhat slower than VersaLink, but the price point of the OBDLink SX is quite attractive.

OBDLink cables can be purchased at scantool.net

:beertoast

SpdFrK_528
Posts: 1
Joined: July 25th, 2019, 4:17 am

Re: OBDLink SX is now supported!

Post by SpdFrK_528 »

Versatune does not recognize/see my OBDLink SX, like its not plugged at all but it is.

- Firmware updated
- Drivers OK (Windows says so...)
- Windows 7 32 bit.

User avatar
Ugnius @ VersaTune
Lead developer
Posts: 436
Joined: March 19th, 2010, 11:57 am

Re: OBDLink SX is now supported!

Post by Ugnius @ VersaTune »

Please open VersaTuner settings (click the gear in the top right corner) and make sure that OBDLink SX is selected as the vehicle interface as shown here:
OBDLink SX.png
OBDLink SX.png (33.69 KiB) Viewed 1614 times
Then when you try to identify your car, make sure that ignition is turned on.

Post Reply