We are excited to announce that OBDLink SX cables are now supported by all versions of VersaTuner.
Logging and flashing are somewhat slower than VersaLink, but the price point of the OBDLink SX is quite attractive.
OBDLink cables can be purchased at scantool.net
OBDLink SX is now supported!
- Steve @ VersaTune
- Lead tuner
- Posts: 1158
- Joined: March 29th, 2010, 12:58 pm
-
- Posts: 1
- Joined: July 25th, 2019, 4:17 am
Re: OBDLink SX is now supported!
Versatune does not recognize/see my OBDLink SX, like its not plugged at all but it is.
- Firmware updated
- Drivers OK (Windows says so...)
- Windows 7 32 bit.
- Firmware updated
- Drivers OK (Windows says so...)
- Windows 7 32 bit.
- Ugnius @ VersaTune
- Lead developer
- Posts: 590
- Joined: March 19th, 2010, 11:57 am
Re: OBDLink SX is now supported!
Please open VersaTuner settings (click the gear in the top right corner) and make sure that OBDLink SX is selected as the vehicle interface as shown here:
Then when you try to identify your car, make sure that ignition is turned on.
Then when you try to identify your car, make sure that ignition is turned on.
-
- Posts: 3
- Joined: April 5th, 2021, 12:45 pm
Re: OBDLink SX is now supported!
How do you change to a USB cord? My only choices shown are Bluetooth options
-
- Posts: 3
- Joined: April 5th, 2021, 12:45 pm
Re: OBDLink SX is now supported!
Now I'm receiving this error code The calling thread must be STA because many UI components require this