OBDlink SX Firmware Problem

Discussion of various J2534 Pass-Thru devices and Portable Computers.
Post Reply
Mark Aichner
Posts: 1
Joined: May 28th, 2019, 11:46 am

OBDlink SX Firmware Problem

Post by Mark Aichner »

Since updating Versa Tuner I have been getting a message to update my OBDlink SX corded adapter to firmware 4.5.0

I am unable to locate this version of the firmware in the manufacturers site, please advise

User avatar
Ugnius @ VersaTune
Lead developer
Posts: 436
Joined: March 19th, 2010, 11:57 am

Re: OBDlink SX Firmware Problem

Post by Ugnius @ VersaTune »

You can find it at the bottom of this page:
https://www.versatuner.com/licenses

jfsmazda2015
Posts: 1
Joined: May 31st, 2019, 1:48 pm

Re: OBDlink SX Firmware Problem

Post by jfsmazda2015 »

I tried updating the firmware but the program will not recognize the port it is plugged into no matter what I set the baud rate at.

User avatar
Ugnius @ VersaTune
Lead developer
Posts: 436
Joined: March 19th, 2010, 11:57 am

Re: OBDlink SX Firmware Problem

Post by Ugnius @ VersaTune »

Can you try another computer? Are you sure you specified the correct port?

SirLevi
Posts: 15
Joined: June 13th, 2019, 5:00 am
Location: New York

Re: OBDlink SX Firmware 4.5.1 April 2019 release

Post by SirLevi »

Anyone updated their OBDLink SX Firmware 4.5.1 - April 2019 release date

https://www.scantool.net/downloads/updates/obdlink_sx/

This major release fixed several bugs including:

ATTA now works when used with ATCEA
STCFCPA now checks if a flow control address pair already exists
Fixed CAN multi-frame messaging with the STPX command
Fixed J1939 printing with headers on
Fixed printing invalid KWP key bytes
Fixed “set protocol” reopening current protocol if invalid protocol
Fixed single-frame CAN printing
Fixed STM clearing default filters on exit
Fixed STPX auto checksum issue

User avatar
Ugnius @ VersaTune
Lead developer
Posts: 436
Joined: March 19th, 2010, 11:57 am

Re: OBDlink SX Firmware Problem

Post by Ugnius @ VersaTune »

We have tested this release and it seems to work fine. We recommend everyone with 4.5.0 beta to upgrade to the official 4.5.1 firmware.

SirLevi
Posts: 15
Joined: June 13th, 2019, 5:00 am
Location: New York

Re: OBDlink SX Firmware Problem

Post by SirLevi »

Thank you for confirming this.

Post Reply