OBD interfaces

Discussion of various J2534 Pass-Thru devices and Portable Computers.
Post Reply
Enki
Posts: 43
Joined: December 2nd, 2014, 9:13 pm

OBD interfaces

Post by Enki »

Couple of questions regarding the available interfaces to use VT with:

1. Is there any functional difference (as far as VT goes) between the available options?

2. Is there any point in upgrading from a Mongoose Pro to a Mongoose Plus 3?

3. Is there a way to purchase just the Versalink v3 from the store without purchasing a full new VT license?

Thanks!
User avatar
Ugnius @ VersaTune
Lead developer
Posts: 580
Joined: March 19th, 2010, 11:57 am

Re: OBD interfaces

Post by Ugnius @ VersaTune »

1. In VersaTuner all supported hardware interfaces offer the same functionality. J2534 based vehicle interfaces (Tactrix OpenPort 2.0 or Mongoose Pro) are slighly faster than OBDLink SX. OBDLink SX is faster than OBDLink LX/MX/MX+. That means it will take slighly shorter to reflash an ECU or you will be able to log more samples per second when data logging.
2. Mongoose Pro offers the same speed and features as Mongoose Plus 3. The main new feature on the Mongoose Plus 3 is the possibility to disconnect the USB cable from the interface. In previous versions it was permanently attached.
3. Please contact us at [email protected] and if you have a VersaTuner license, we can sell you a VersaLink V3 for $170 USD + shipping.
Enki
Posts: 43
Joined: December 2nd, 2014, 9:13 pm

Re: OBD interfaces

Post by Enki »

Thanks!
Post Reply