Problem with PassThrough Installation Please Reinstall Drivers

Discussion of various J2534 Pass-Thru devices and Portable Computers.
Post Reply
Rankle
Posts: 11
Joined: January 30th, 2018, 10:15 am

Problem with PassThrough Installation Please Reinstall Drivers

Post by Rankle »

Hi All,

Come across the attached error today when trying to use my Mongoose Pro ISO/CAN2 in Versatuner.

Nothing has changed as far as I am aware on my laptop, it just stopped working.

Tried downloading the latest drivers and re-installing. Now the Drew software will crash when it tries to activate the device.

Also made sure Versatuner is up-to-date for good measure, restarted my machine, tried different USB ports too.

I have used this Mongoose before on this computer, so it should already be activated.

Can anyone help at all?

Windows 10 Laptop
Intel i3 Processor

Thanks
Nick
Attachments
Capture.PNG
Capture.PNG (222.12 KiB) Viewed 3711 times
User avatar
Ugnius @ VersaTune
Lead developer
Posts: 580
Joined: March 19th, 2010, 11:57 am

Re: Problem with PassThrough Installation Please Reinstall Drivers

Post by Ugnius @ VersaTune »

Try uninstalling everything Drewtech-related from your computer. Then only install the necessary drivers. Do not try activating the cable because that can only be done once.
Rankle
Posts: 11
Joined: January 30th, 2018, 10:15 am

Re: Problem with PassThrough Installation Please Reinstall Drivers

Post by Rankle »

Hey Ugnius.

So figured out the issue. My Laptop hard drive was failing. I checked the event log the day after posting this and there were loads of Disk errors in the System Log.

I have purchased a new laptop, reinstalled everything and all is fine now.

I guess the disk errors were corrupting driver files somewhere down the line.

Thanks
Nick
Post Reply