Hello
-
- Posts: 35
- Joined: July 19th, 2015, 10:37 pm
Re: Hello
here is the log i did
- Attachments
-
- VersaTuner Logs trying to start and idle.zip
- (13.61 KiB) Downloaded 726 times
2007 Mazda CX-7. Manley H-beam rods, Wiseco 88 mm pistons, King racing bearings, balance the crankshaft, bosch 3 bar map sensor, removed VTCS and egr, JB OCC, JB 3.5 inch intake, FMIC, Forge v1 BPV, BNR S3 turbo, 3 inch catless DP.
Re: Hello
Export the log as CSV and add it to the forum.
Ok, here's his log.
Ok, here's his log.
2008 Cosmic Blue Mazda 3MPS
Built engine + WMI + GTX3071 gen2, ~509BHP @34PSI
2008 Icy Blue Mazda CX7
Stock engine and exhaust (YES!!), JBR3" + GTX2867 gen2 + Autotech HPFP, self-tuned to 330-ish BHP
Built engine + WMI + GTX3071 gen2, ~509BHP @34PSI
2008 Icy Blue Mazda CX7
Stock engine and exhaust (YES!!), JBR3" + GTX2867 gen2 + Autotech HPFP, self-tuned to 330-ish BHP
Re: Hello
Hard to tell... does the car stay on if you push the acceleration pedal a bit? Maybe you have a dirty throttle body and the flapper won't move as commanded.
2008 Cosmic Blue Mazda 3MPS
Built engine + WMI + GTX3071 gen2, ~509BHP @34PSI
2008 Icy Blue Mazda CX7
Stock engine and exhaust (YES!!), JBR3" + GTX2867 gen2 + Autotech HPFP, self-tuned to 330-ish BHP
Built engine + WMI + GTX3071 gen2, ~509BHP @34PSI
2008 Icy Blue Mazda CX7
Stock engine and exhaust (YES!!), JBR3" + GTX2867 gen2 + Autotech HPFP, self-tuned to 330-ish BHP
-
- Posts: 35
- Joined: July 19th, 2015, 10:37 pm
Re: Hello
hey hey hey all. I got the car running great. I forgot to connected my pcv tube up to the intake manifold. oh well. shes running. im getting a fuel cut. on hard acceleration.
2007 Mazda CX-7. Manley H-beam rods, Wiseco 88 mm pistons, King racing bearings, balance the crankshaft, bosch 3 bar map sensor, removed VTCS and egr, JB OCC, JB 3.5 inch intake, FMIC, Forge v1 BPV, BNR S3 turbo, 3 inch catless DP.
-
- Posts: 35
- Joined: July 19th, 2015, 10:37 pm
Re: Hello
When and head installed a occ. and a new pcv valve. did a log today. running great. now its the tuning thing. also found that i had a 3 bar tmap in not a 2.5. opps.
- Attachments
-
- Data log - 1_2_2016 6_33_03 PM.csv
- (57.03 KiB) Downloaded 813 times
2007 Mazda CX-7. Manley H-beam rods, Wiseco 88 mm pistons, King racing bearings, balance the crankshaft, bosch 3 bar map sensor, removed VTCS and egr, JB OCC, JB 3.5 inch intake, FMIC, Forge v1 BPV, BNR S3 turbo, 3 inch catless DP.
Re: Hello
Your log doesn't tell much because you're not logging the relevant stuff, but good to hear everything is fine.
2008 Cosmic Blue Mazda 3MPS
Built engine + WMI + GTX3071 gen2, ~509BHP @34PSI
2008 Icy Blue Mazda CX7
Stock engine and exhaust (YES!!), JBR3" + GTX2867 gen2 + Autotech HPFP, self-tuned to 330-ish BHP
Built engine + WMI + GTX3071 gen2, ~509BHP @34PSI
2008 Icy Blue Mazda CX7
Stock engine and exhaust (YES!!), JBR3" + GTX2867 gen2 + Autotech HPFP, self-tuned to 330-ish BHP
-
- Posts: 35
- Joined: July 19th, 2015, 10:37 pm
Hey guys,
The car is running great. Time to turn her up. Is there anything, here that help me learn to tune the car?
The car is running great. Time to turn her up. Is there anything, here that help me learn to tune the car?
2007 Mazda CX-7. Manley H-beam rods, Wiseco 88 mm pistons, King racing bearings, balance the crankshaft, bosch 3 bar map sensor, removed VTCS and egr, JB OCC, JB 3.5 inch intake, FMIC, Forge v1 BPV, BNR S3 turbo, 3 inch catless DP.
Re: Hello
Take a WOT log in 3rd (I think it will do for a CX7) and post your tune.
2008 Cosmic Blue Mazda 3MPS
Built engine + WMI + GTX3071 gen2, ~509BHP @34PSI
2008 Icy Blue Mazda CX7
Stock engine and exhaust (YES!!), JBR3" + GTX2867 gen2 + Autotech HPFP, self-tuned to 330-ish BHP
Built engine + WMI + GTX3071 gen2, ~509BHP @34PSI
2008 Icy Blue Mazda CX7
Stock engine and exhaust (YES!!), JBR3" + GTX2867 gen2 + Autotech HPFP, self-tuned to 330-ish BHP
-
- Posts: 35
- Joined: July 19th, 2015, 10:37 pm
Re: Hello
I did a log today. Trying to upload my tune.
- Attachments
-
- Boost control.csv
- (27.84 KiB) Downloaded 635 times
-
- Mass airflow sensor calibration.csv
- (22.71 KiB) Downloaded 646 times
2007 Mazda CX-7. Manley H-beam rods, Wiseco 88 mm pistons, King racing bearings, balance the crankshaft, bosch 3 bar map sensor, removed VTCS and egr, JB OCC, JB 3.5 inch intake, FMIC, Forge v1 BPV, BNR S3 turbo, 3 inch catless DP.
Re: Hello
You will have to create a zip file, I don't think the forum software will like the file extension of the tune...
2008 Cosmic Blue Mazda 3MPS
Built engine + WMI + GTX3071 gen2, ~509BHP @34PSI
2008 Icy Blue Mazda CX7
Stock engine and exhaust (YES!!), JBR3" + GTX2867 gen2 + Autotech HPFP, self-tuned to 330-ish BHP
Built engine + WMI + GTX3071 gen2, ~509BHP @34PSI
2008 Icy Blue Mazda CX7
Stock engine and exhaust (YES!!), JBR3" + GTX2867 gen2 + Autotech HPFP, self-tuned to 330-ish BHP