Pebo,
I responded to your PM.
There are 4 idle speed tables and 4 ignition timing tables related to idle speed correction.
My Current CX7 Tune.
- Steve @ VersaTune
- Lead tuner
- Posts: 1159
- Joined: March 29th, 2010, 12:58 pm
- Steve @ VersaTune
- Lead tuner
- Posts: 1159
- Joined: March 29th, 2010, 12:58 pm
Re: My Current CX7 Tune.
In March 2013, we released VersaTuner 1.8.5 which exposed the additional idle control tables.Sassimac wrote:Hi Pebo...
From memory (I sold the car 6 months ago), I was not able to alter the idle speed as you suggest. All I managed to do was alter the cold start idle speed.
http://www.versatune.net/forum/viewtopic.php?f=1&t=352
Re: My Current CX7 Tune.
This is a bit old, but i will ask anyway.
I was reading your tune and i have a question about the AFR 10:1 (0.68), what kind of fuel did you use for this ratio? i mean, normal is around 14,7:1, so im a bit confused if you use some ethanol mixture and if this can work just with 95oct?
Tnx
I was reading your tune and i have a question about the AFR 10:1 (0.68), what kind of fuel did you use for this ratio? i mean, normal is around 14,7:1, so im a bit confused if you use some ethanol mixture and if this can work just with 95oct?
Tnx
- Steve @ VersaTune
- Lead tuner
- Posts: 1159
- Joined: March 29th, 2010, 12:58 pm
Re: My Current CX7 Tune.
14.7:1 is used at low load for efficiency and low emissions. Richer mixtures like 10:1 are used at high load for charge cooling and knock control, especially in direct injection turbo application.