Tune Turbo Upgrade
Re: Tune Turbo Upgrade
Gonna keep it tame for now. Just want to get the most out of what I've done to it without causing damage. Do you happen to have a tune that would be compatible with my CX-7?
2007 Mazda CX-7 AWD Grand Touring - Electric Blue Mica
CST4 turbo, CS 3.5bar MAP, CS Stage II SRI w/ TIP, dual port BOV/BPV, 3 port EBCS, 3" TBE w/ Magnaflow muffler, KYB Excel-G shocks, deleted catalytic converters
Disabled EGR, 2nd O2, VTCS
CST4 turbo, CS 3.5bar MAP, CS Stage II SRI w/ TIP, dual port BOV/BPV, 3 port EBCS, 3" TBE w/ Magnaflow muffler, KYB Excel-G shocks, deleted catalytic converters
Disabled EGR, 2nd O2, VTCS
-
- Posts: 35
- Joined: July 19th, 2015, 10:37 pm
Re: Tune Turbo Upgrade
I do not. Every car is different. I would get a hold of purple drank. for tuning. Also hit me up on facebook on cx-7 Modderz
2007 Mazda CX-7. Manley H-beam rods, Wiseco 88 mm pistons, King racing bearings, balance the crankshaft, bosch 3 bar map sensor, removed VTCS and egr, JB OCC, JB 3.5 inch intake, FMIC, Forge v1 BPV, BNR S3 turbo, 3 inch catless DP.
Re: Tune Turbo Upgrade
I assume you have fuel pump internals...
2008 Cosmic Blue Mazda 3MPS
Built engine + WMI + GTX3071 gen2, ~509BHP @34PSI
2008 Icy Blue Mazda CX7
Stock engine and exhaust (YES!!), JBR3" + GTX2867 gen2 + Autotech HPFP, self-tuned to 330-ish BHP
Built engine + WMI + GTX3071 gen2, ~509BHP @34PSI
2008 Icy Blue Mazda CX7
Stock engine and exhaust (YES!!), JBR3" + GTX2867 gen2 + Autotech HPFP, self-tuned to 330-ish BHP
Re: Tune Turbo Upgrade
No fuel pump internals.
2007 Mazda CX-7 AWD Grand Touring - Electric Blue Mica
CST4 turbo, CS 3.5bar MAP, CS Stage II SRI w/ TIP, dual port BOV/BPV, 3 port EBCS, 3" TBE w/ Magnaflow muffler, KYB Excel-G shocks, deleted catalytic converters
Disabled EGR, 2nd O2, VTCS
CST4 turbo, CS 3.5bar MAP, CS Stage II SRI w/ TIP, dual port BOV/BPV, 3 port EBCS, 3" TBE w/ Magnaflow muffler, KYB Excel-G shocks, deleted catalytic converters
Disabled EGR, 2nd O2, VTCS
Re: Tune Turbo Upgrade
I plan on upgrading the HPFP internals eventually, but for now just want to maximize performance and reliability with what I'm working with.
2007 Mazda CX-7 AWD Grand Touring - Electric Blue Mica
CST4 turbo, CS 3.5bar MAP, CS Stage II SRI w/ TIP, dual port BOV/BPV, 3 port EBCS, 3" TBE w/ Magnaflow muffler, KYB Excel-G shocks, deleted catalytic converters
Disabled EGR, 2nd O2, VTCS
CST4 turbo, CS 3.5bar MAP, CS Stage II SRI w/ TIP, dual port BOV/BPV, 3 port EBCS, 3" TBE w/ Magnaflow muffler, KYB Excel-G shocks, deleted catalytic converters
Disabled EGR, 2nd O2, VTCS
Re: Tune Turbo Upgrade
No! I don't think you understand the situation. If you have an upgraded turbo so the HPFP internals should be on the car BEFORE the turbo.
2008 Cosmic Blue Mazda 3MPS
Built engine + WMI + GTX3071 gen2, ~509BHP @34PSI
2008 Icy Blue Mazda CX7
Stock engine and exhaust (YES!!), JBR3" + GTX2867 gen2 + Autotech HPFP, self-tuned to 330-ish BHP
Built engine + WMI + GTX3071 gen2, ~509BHP @34PSI
2008 Icy Blue Mazda CX7
Stock engine and exhaust (YES!!), JBR3" + GTX2867 gen2 + Autotech HPFP, self-tuned to 330-ish BHP
Re: Tune Turbo Upgrade
The HPFP is the same for both a CX-7 and Mazdaspeed3/6. The CX-7 turbo is a smaller K04. If the CS turbo is basically the same size as the MS3/6 turbo, why would the fuel pump internals need to be upgraded immediately?
2007 Mazda CX-7 AWD Grand Touring - Electric Blue Mica
CST4 turbo, CS 3.5bar MAP, CS Stage II SRI w/ TIP, dual port BOV/BPV, 3 port EBCS, 3" TBE w/ Magnaflow muffler, KYB Excel-G shocks, deleted catalytic converters
Disabled EGR, 2nd O2, VTCS
CST4 turbo, CS 3.5bar MAP, CS Stage II SRI w/ TIP, dual port BOV/BPV, 3 port EBCS, 3" TBE w/ Magnaflow muffler, KYB Excel-G shocks, deleted catalytic converters
Disabled EGR, 2nd O2, VTCS
Re: Tune Turbo Upgrade
The CS turbo may be the same in size as the 3/6MPS turbo if you measure it, but it actually flows a lot more air, has a different response, and so on. The CS turbo is considered a "big turbo".
2008 Cosmic Blue Mazda 3MPS
Built engine + WMI + GTX3071 gen2, ~509BHP @34PSI
2008 Icy Blue Mazda CX7
Stock engine and exhaust (YES!!), JBR3" + GTX2867 gen2 + Autotech HPFP, self-tuned to 330-ish BHP
Built engine + WMI + GTX3071 gen2, ~509BHP @34PSI
2008 Icy Blue Mazda CX7
Stock engine and exhaust (YES!!), JBR3" + GTX2867 gen2 + Autotech HPFP, self-tuned to 330-ish BHP
Re: Tune Turbo Upgrade
Understood, makes sense. Even still, the engine could be tuned to operate at a safe level? I don't need to tune it to make 500hp at this time, I just want it to run safely within the capabilities of the existing setup. Any help with tuning the maps would be greatly appreciated. Trying to have the car driveable this weekend.
2007 Mazda CX-7 AWD Grand Touring - Electric Blue Mica
CST4 turbo, CS 3.5bar MAP, CS Stage II SRI w/ TIP, dual port BOV/BPV, 3 port EBCS, 3" TBE w/ Magnaflow muffler, KYB Excel-G shocks, deleted catalytic converters
Disabled EGR, 2nd O2, VTCS
CST4 turbo, CS 3.5bar MAP, CS Stage II SRI w/ TIP, dual port BOV/BPV, 3 port EBCS, 3" TBE w/ Magnaflow muffler, KYB Excel-G shocks, deleted catalytic converters
Disabled EGR, 2nd O2, VTCS
Re: Tune Turbo Upgrade
PM me with the list of mods (all of them) and the versatuner download link for your car. I can make you a safe calibration for that.
2008 Cosmic Blue Mazda 3MPS
Built engine + WMI + GTX3071 gen2, ~509BHP @34PSI
2008 Icy Blue Mazda CX7
Stock engine and exhaust (YES!!), JBR3" + GTX2867 gen2 + Autotech HPFP, self-tuned to 330-ish BHP
Built engine + WMI + GTX3071 gen2, ~509BHP @34PSI
2008 Icy Blue Mazda CX7
Stock engine and exhaust (YES!!), JBR3" + GTX2867 gen2 + Autotech HPFP, self-tuned to 330-ish BHP