Hello,
Just purchased VersaTuner and joined the forum.
FLashed the high load map to my Mazda 6 Mps which standard apart from a Jetex cat back.
I am new to tuning but trying to learn as much as possible.
Would someone mind just glancing over my first log.
The first two sections are 30-80 mph in 3rd gear and the final one is a 40-100 mph in 4th.
I can't see anything too nasty going on but I am a newbie. No knock at all but the WGDC does hit 100% at times?
Let me know what you experts think please.
Cheers Mike.
New User First Log. High Load OTS Map
New User First Log. High Load OTS Map
- Attachments
-
- Log(4-11-18).xlsx
- (25.72 KiB) Downloaded 414 times
Re: New User First Log. High Load OTS Map
Where are you located? I'm curious because it seems to be very hot there.
2008 Cosmic Blue Mazda 3MPS
Built engine + WMI + GTX3071 gen2, ~509BHP @34PSI
2008 Icy Blue Mazda CX7
Stock engine and exhaust (YES!!), JBR3" + GTX2867 gen2 + Autotech HPFP, self-tuned to 330-ish BHP
Built engine + WMI + GTX3071 gen2, ~509BHP @34PSI
2008 Icy Blue Mazda CX7
Stock engine and exhaust (YES!!), JBR3" + GTX2867 gen2 + Autotech HPFP, self-tuned to 330-ish BHP
Re: New User First Log. High Load OTS Map
South of England. Is that from looking at the BAT's?
Temperature has been around 50-55 degrees Fahrenheit when i took that log. Boost temps of 99 degree F are quite normal?
Temperature has been around 50-55 degrees Fahrenheit when i took that log. Boost temps of 99 degree F are quite normal?
Re: New User First Log. High Load OTS Map
Oh I'm sorry, the temperatures are in F and I was thinking in C, the first line of the sheet was not expanding properly.
Everything looks good now that I'm reading it correctly. It looks like it was a 3rd gear log even though I wish you logged the engine RPM as well.
Everything looks good now that I'm reading it correctly. It looks like it was a 3rd gear log even though I wish you logged the engine RPM as well.
2008 Cosmic Blue Mazda 3MPS
Built engine + WMI + GTX3071 gen2, ~509BHP @34PSI
2008 Icy Blue Mazda CX7
Stock engine and exhaust (YES!!), JBR3" + GTX2867 gen2 + Autotech HPFP, self-tuned to 330-ish BHP
Built engine + WMI + GTX3071 gen2, ~509BHP @34PSI
2008 Icy Blue Mazda CX7
Stock engine and exhaust (YES!!), JBR3" + GTX2867 gen2 + Autotech HPFP, self-tuned to 330-ish BHP
Re: New User First Log. High Load OTS Map
Thank you for having a look. I will post some more logs soon and include rpm. Trying to get the AFR's as precise as possible then increasing loads a touch then maybe try advancing the timing slightly and see how that goes as I have 0 knock at present. Obviously I want to keep it that way but maybe there is room for a bit of timing adjustment.
I don't think I can increase the loads much more as the boost is hitting 18 and 19 at certain points but the WGDC is hitting 100%
Let me know your thoughts.
I don't think I can increase the loads much more as the boost is hitting 18 and 19 at certain points but the WGDC is hitting 100%
Let me know your thoughts.
Re: New User First Log. High Load OTS Map
You can use this logging preset for WOT logs: https://www.dropbox.com/s/kxpm1g0nyafjj ... vtpre?dl=0
2008 Cosmic Blue Mazda 3MPS
Built engine + WMI + GTX3071 gen2, ~509BHP @34PSI
2008 Icy Blue Mazda CX7
Stock engine and exhaust (YES!!), JBR3" + GTX2867 gen2 + Autotech HPFP, self-tuned to 330-ish BHP
Built engine + WMI + GTX3071 gen2, ~509BHP @34PSI
2008 Icy Blue Mazda CX7
Stock engine and exhaust (YES!!), JBR3" + GTX2867 gen2 + Autotech HPFP, self-tuned to 330-ish BHP
Re: New User First Log. High Load OTS Map
Made a few adjustments to the base map and have improved the 40-100 by 0.7 seconds. I don't think there is much more i can squeeze out of it before replacing the stock intake and TIP. Hitting almost 240 g/s and from what i have read that is a pretty decent figure for a stock car?
- Attachments
-
- 4thWOT.xlsx
- (14.98 KiB) Downloaded 377 times
Re: New User First Log. High Load OTS Map
240g/s is indeed decent. This may actually be the flow limit of the factory intake with that turbo. I managed to push mine to 260g/s though.
Send me your current map somehow (pm, dropbox, google drive, whatever), and I'll change it for you based on the CX7 map I was running when the CX7 was bone stock (including the HPFP).
Also please let me know what fuel you're using (brand and type).
Send me your current map somehow (pm, dropbox, google drive, whatever), and I'll change it for you based on the CX7 map I was running when the CX7 was bone stock (including the HPFP).
Also please let me know what fuel you're using (brand and type).
2008 Cosmic Blue Mazda 3MPS
Built engine + WMI + GTX3071 gen2, ~509BHP @34PSI
2008 Icy Blue Mazda CX7
Stock engine and exhaust (YES!!), JBR3" + GTX2867 gen2 + Autotech HPFP, self-tuned to 330-ish BHP
Built engine + WMI + GTX3071 gen2, ~509BHP @34PSI
2008 Icy Blue Mazda CX7
Stock engine and exhaust (YES!!), JBR3" + GTX2867 gen2 + Autotech HPFP, self-tuned to 330-ish BHP
Re: New User First Log. High Load OTS Map
Thank you. I don't currently have up- rated HPFP internals but the fuel pressures seem ok so far.
I always use shell V-power rated at 99 octane.
I have attached the current map for you to look at.
Cheers
Mike
I always use shell V-power rated at 99 octane.
I have attached the current map for you to look at.
Cheers
Mike
- Attachments
-
- Current Map.vtune
- (111.9 KiB) Downloaded 343 times
Re: New User First Log. High Load OTS Map
Ok, you're good... it seems like you're already pushing it more than I did without fuel pump internals...
2008 Cosmic Blue Mazda 3MPS
Built engine + WMI + GTX3071 gen2, ~509BHP @34PSI
2008 Icy Blue Mazda CX7
Stock engine and exhaust (YES!!), JBR3" + GTX2867 gen2 + Autotech HPFP, self-tuned to 330-ish BHP
Built engine + WMI + GTX3071 gen2, ~509BHP @34PSI
2008 Icy Blue Mazda CX7
Stock engine and exhaust (YES!!), JBR3" + GTX2867 gen2 + Autotech HPFP, self-tuned to 330-ish BHP