New User First Log. High Load OTS Map

Discussion of tuning specific to MAZDASPEED6/MAZDASPEED Atenza/Mazda 6 MPS vehicles
Post Reply
miket55
Posts: 5
Joined: November 2nd, 2018, 8:55 am

New User First Log. High Load OTS Map

Post by miket55 »

Hello,

Just purchased VersaTuner and joined the forum.

FLashed the high load map to my Mazda 6 Mps which standard apart from a Jetex cat back.

I am new to tuning but trying to learn as much as possible.

Would someone mind just glancing over my first log.

The first two sections are 30-80 mph in 3rd gear and the final one is a 40-100 mph in 4th.

I can't see anything too nasty going on but I am a newbie. No knock at all but the WGDC does hit 100% at times?

Let me know what you experts think please.

Cheers Mike.
Attachments
Log(4-11-18).xlsx
(25.72 KiB) Downloaded 395 times
mituc
VersaTuner guru
Posts: 1324
Joined: December 17th, 2011, 2:47 pm
Location: Iasi/Romania

Re: New User First Log. High Load OTS Map

Post by mituc »

Where are you located? I'm curious because it seems to be very hot there.
2008 Cosmic Blue Mazda 3MPS
Built engine + WMI + GTX3071 gen2, ~509BHP @34PSI
2008 Icy Blue Mazda CX7
Stock engine and exhaust (YES!!), JBR3" + GTX2867 gen2 + Autotech HPFP, self-tuned to 330-ish BHP
miket55
Posts: 5
Joined: November 2nd, 2018, 8:55 am

Re: New User First Log. High Load OTS Map

Post by miket55 »

South of England. Is that from looking at the BAT's?

Temperature has been around 50-55 degrees Fahrenheit when i took that log. Boost temps of 99 degree F are quite normal?
mituc
VersaTuner guru
Posts: 1324
Joined: December 17th, 2011, 2:47 pm
Location: Iasi/Romania

Re: New User First Log. High Load OTS Map

Post by mituc »

Oh I'm sorry, the temperatures are in F and I was thinking in C, the first line of the sheet was not expanding properly.

Everything looks good now that I'm reading it correctly. It looks like it was a 3rd gear log even though I wish you logged the engine RPM as well.
2008 Cosmic Blue Mazda 3MPS
Built engine + WMI + GTX3071 gen2, ~509BHP @34PSI
2008 Icy Blue Mazda CX7
Stock engine and exhaust (YES!!), JBR3" + GTX2867 gen2 + Autotech HPFP, self-tuned to 330-ish BHP
miket55
Posts: 5
Joined: November 2nd, 2018, 8:55 am

Re: New User First Log. High Load OTS Map

Post by miket55 »

Thank you for having a look. I will post some more logs soon and include rpm. Trying to get the AFR's as precise as possible then increasing loads a touch then maybe try advancing the timing slightly and see how that goes as I have 0 knock at present. Obviously I want to keep it that way but maybe there is room for a bit of timing adjustment.

I don't think I can increase the loads much more as the boost is hitting 18 and 19 at certain points but the WGDC is hitting 100%

Let me know your thoughts.
mituc
VersaTuner guru
Posts: 1324
Joined: December 17th, 2011, 2:47 pm
Location: Iasi/Romania

Re: New User First Log. High Load OTS Map

Post by mituc »

You can use this logging preset for WOT logs: https://www.dropbox.com/s/kxpm1g0nyafjj ... vtpre?dl=0
2008 Cosmic Blue Mazda 3MPS
Built engine + WMI + GTX3071 gen2, ~509BHP @34PSI
2008 Icy Blue Mazda CX7
Stock engine and exhaust (YES!!), JBR3" + GTX2867 gen2 + Autotech HPFP, self-tuned to 330-ish BHP
miket55
Posts: 5
Joined: November 2nd, 2018, 8:55 am

Re: New User First Log. High Load OTS Map

Post by miket55 »

Made a few adjustments to the base map and have improved the 40-100 by 0.7 seconds. I don't think there is much more i can squeeze out of it before replacing the stock intake and TIP. Hitting almost 240 g/s and from what i have read that is a pretty decent figure for a stock car?
Attachments
4thWOT.xlsx
(14.98 KiB) Downloaded 361 times
mituc
VersaTuner guru
Posts: 1324
Joined: December 17th, 2011, 2:47 pm
Location: Iasi/Romania

Re: New User First Log. High Load OTS Map

Post by mituc »

240g/s is indeed decent. This may actually be the flow limit of the factory intake with that turbo. I managed to push mine to 260g/s though.
Send me your current map somehow (pm, dropbox, google drive, whatever), and I'll change it for you based on the CX7 map I was running when the CX7 was bone stock (including the HPFP).
Also please let me know what fuel you're using (brand and type).
2008 Cosmic Blue Mazda 3MPS
Built engine + WMI + GTX3071 gen2, ~509BHP @34PSI
2008 Icy Blue Mazda CX7
Stock engine and exhaust (YES!!), JBR3" + GTX2867 gen2 + Autotech HPFP, self-tuned to 330-ish BHP
miket55
Posts: 5
Joined: November 2nd, 2018, 8:55 am

Re: New User First Log. High Load OTS Map

Post by miket55 »

Thank you. I don't currently have up- rated HPFP internals but the fuel pressures seem ok so far.

I always use shell V-power rated at 99 octane.

I have attached the current map for you to look at.

Cheers

Mike
Attachments
Current Map.vtune
(111.9 KiB) Downloaded 325 times
mituc
VersaTuner guru
Posts: 1324
Joined: December 17th, 2011, 2:47 pm
Location: Iasi/Romania

Re: New User First Log. High Load OTS Map

Post by mituc »

Ok, you're good... it seems like you're already pushing it more than I did without fuel pump internals...
2008 Cosmic Blue Mazda 3MPS
Built engine + WMI + GTX3071 gen2, ~509BHP @34PSI
2008 Icy Blue Mazda CX7
Stock engine and exhaust (YES!!), JBR3" + GTX2867 gen2 + Autotech HPFP, self-tuned to 330-ish BHP
Post Reply