Question re:post flashing.

[lincsmps6]

Hi, I would like to know if the STFT's & LTFT's are reset after each and every flash. Just wondering because sometimes I am making small changes to my map that have no impact on the general fueling/timing etc.
For example, if I simply alter the speed limiter on my map then reflash, do I still need to drive like a Granny to allow the ECU to relearn all over again or will it still have my previous fuel trims to read from?
Cheers...

[Steve @ VersaTune]

The trims are always reset when you reflash the ecu. If your maf calibration is good you can hit it hard after a flash.