Interface Not Connected
Interface Not Connected
Running up-to-date Windows 10 via Boot Camp on a MacBook Pro. Using VersaLink MongoosePro ISO/CAN2. When attempting to connect to vehicle, no software will recognize that the device is plugged in. The green indicator light on the OBD2 end is flashing fast like normal. In the MongoosePro Configurator application from Drew Technologies, device is not present there either. I've tried to reinstall the drivers and reactivate device to no avail. Applications just do not recognize that it is plugged in. Windows shows the device as "USB Serial Device (COM3)". Please advise.
2007 Mazda CX-7 AWD Grand Touring - Electric Blue Mica
CST4 turbo, CS 3.5bar MAP, CS Stage II SRI w/ TIP, dual port BOV/BPV, 3 port EBCS, 3" TBE w/ Magnaflow muffler, KYB Excel-G shocks, deleted catalytic converters
Disabled EGR, 2nd O2, VTCS
CST4 turbo, CS 3.5bar MAP, CS Stage II SRI w/ TIP, dual port BOV/BPV, 3 port EBCS, 3" TBE w/ Magnaflow muffler, KYB Excel-G shocks, deleted catalytic converters
Disabled EGR, 2nd O2, VTCS
-
Ugnius @ VersaTune
- Lead developer
- Posts: 637
- Joined: March 19th, 2010, 11:57 am
Re: Interface Not Connected
Can you email us a photo of the label on the cable at [email protected] ?
Re: Interface Not Connected
Sent.Ugnius @ VersaTune wrote:Can you email us a photo of the label on the cable at [email protected] ?
Sent from my iPhone using Tapatalk
2007 Mazda CX-7 AWD Grand Touring - Electric Blue Mica
CST4 turbo, CS 3.5bar MAP, CS Stage II SRI w/ TIP, dual port BOV/BPV, 3 port EBCS, 3" TBE w/ Magnaflow muffler, KYB Excel-G shocks, deleted catalytic converters
Disabled EGR, 2nd O2, VTCS
CST4 turbo, CS 3.5bar MAP, CS Stage II SRI w/ TIP, dual port BOV/BPV, 3 port EBCS, 3" TBE w/ Magnaflow muffler, KYB Excel-G shocks, deleted catalytic converters
Disabled EGR, 2nd O2, VTCS