Tunes Recommendation

Tuning discussion for all second generation Mazda 2.3 MZR DISI Turbo powered vehicles
Post Reply
Edain
Posts: 10
Joined: November 27th, 2024, 1:31 pm

Tunes Recommendation

Post by Edain »

Hello Team:
I would like you to recommend a tune from the available list.
My car has the following modifications:

- HPFP Autotech.
- TMIC ETS.
- Down Pipe.
- Billet Compressor Wheel Street Performance Turbocharger (Maxpeedingrods).
- Blow off TurboSmart.
- Cold Air Intake High-Flow - KyN (MODEL: 69-6011TS)
- Full licensed VersaTuner.

I don't seek out Competitions, I just want to get the most out of the modifications I have, as long as it's below the red line.
I don't want Crackle and Pop.

1. 93US/98EU Octane Stage 2 CPE CAI + Corksport Race Pipe
2. Base 93US/98EU Octane with Crackle and Pop
3. Base 93US/98EU Octane High Load + SRI/CAI
4. 93US/98EU Octane High Load + CPE CAI + Corksport Race Pipe

or any another suggestion?.

Thanks for your help.
mituc
VersaTuner guru
Posts: 1425
Joined: December 17th, 2011, 2:47 pm
Location: Iasi/Romania

Re: Tunes Recommendation

Post by mituc »

I would definitely use one of the High Load tunes but not the one for the CP-e CAI because the MAF calibration for that intake is significantly different than what the K&N needs. Probably #3 will be the most suitable in your case but with these modifications you should think about a custom tune. You can DM me for more guidance and information.
2008 Cosmic Blue Mazda 3MPS
Built engine + WMI + GTX3071 gen2, ~550BHP @35PSI
2008 Icy Blue Mazda CX7
Built engine and stock exhaust (YES!!), JBR3" + GTX2867 gen2 + Autotech HPFP, self-tuned to 360-ish BHP
Post Reply